By Marc Dagenais
Whatever sport you play, there's always the risk of getting injured while you play. While this is usually true for contact sports such as basketball and football, players of non-contact sports are also at risk for injuries.
The reason for this is that when you're playing a particular sport, your body is subjected to so much strain that the wear and tear might eventually catch up with you if you're not careful.
And that can happen when you're a softball pitcher. It goes without saying that injuries can cause you a lot of physical pain and could sideline you probably for a long time, depending on your type of injury. That's why you should avoid the risk of injury as much as possible.
Usual Causes of Softball Pitching Injuries
The most common cause of softball pitching injuries is overuse. As its name suggests, overuse is when you subject your muscle, tendons and ligaments to the same routine over and over again.
Remember what I said earlier about wear and tear taking a toll on your body? That's what happens with overuse injuries. You subject a certain part of your body to too much strain that it eventually becomes injured.
Another type of injury is caused by pulled muscles. This can occur when you don't give your body sufficient time to stretch and warm up. Because of this, the muscles are not primed to do the strenuous activities that you want them to do such as pitching. As with any type of injury, pulled muscles can be very painful.
There are several other softball pitching injuries, but the two I have mentioned are by far the most common.
But the good thing is that you can avoid softball pitching injuries if you know the right thing to do.
Avoiding Softball Pitching Injuries
An ounce of prevention is worth a pound of cure.
That line may already sound trite, but you can never deny the truth the lies beneath it. So you must try to avoid injuries at all costs.
The most basic way of preventing overuse injuries and pulled muscles is by getting enough stretches and warm-ups before a game or practice. Stretching and warming up will help loosen up your muscles. Having tight muscles is usually the cause of injuries such as pulled muscles.
To avoid overuse injuries, you should also give your body enough time to rest and recover after a day of practicing or playing. Softball is a fun game to play, but injuries take the fun out of it, so learn to give your body a rest.
And finally, you should also work on getting your pitching mechanics right. The correct pitching mechanics helps you throw pitches more efficiently and with minimal strain that may cause injuries.
To sum it up, the most common softball pitching injuries include overuse injuries and pulled muscles. But injuries like these can be avoided with the right amount of stretching, warm-ups, rest and the proper pitching mechanics.
So learn how to avoid softball pitching injuries today and be able to enjoy softball for longer.
Marc Dagenais is a softball peak performance coach that helps softball players and coaches improves their game by sharing with them the tips and strategies used by the world's best softball players and coaches to achieve extraordinary performances. Visit his site and sign-up to get his FREE softball hitting tips!
Article Source: http://EzineArticles.com/?expert=Marc_Dagenais
www.SoftballrUs.com
FastpitchSoftballSupply.com
BattingCagesDirect.com
BattingCagesrUs.com
AdvancedSkillsTee.com
ZipnHit-Pro.com
Shop CoachesBest.com for your baseball coaching needs including baseball training aids, training videos, and other coaching supplies. Check out the Derek Jeter Hurricane Hitting machine by SKLZ at HurricaneTrainer.com.
See the “Original” Rotational Hitting Machine at BatAction.com. Are you looking for the perfect trainer to teach proper timing and swing mechanics? You can stop looking and go to HandsBackHitter.com.
Players develop incredible bat speed and confidence when they regularly use the Quick Swing Trainer. See it at QuickSwingTrainer.com. See the world’s most advanced batting tee at AdvancedSkillsTee.com.
Are you looking for a great batting cage at discount prices? Are you considering building your own backyard batting cage and training center? If so, you should visit BattingCagesDirect.com now!
Wednesday, September 30, 2009
Thursday, September 24, 2009
5 Softball Pitching Drills
www.BatAction.com
By Marc Dagenais
Drill 1: Fast and Slow
Purpose: To practice changing speeds.
Procedure: Working with her catcher, the pitcher alternates fast and off-speed pitches. The goal is to keep the delivery the same.
Drill 2: Football Toss
Purpose: To develop correct rise-ball release.
Procedure: The pitcher throws a junior-sized football underhand to a partner. Grip it along the seam with all the fingers and with the thumb on the opposite side. The ball should spiral. If it wobbles in flight, the palm has turned toward the catcher at release.
Drill 3: Four-Corner Control
Purpose: To develop control and accuracy.
Procedure: The pitcher throws to the extreme four corners of the strike zone. When she achieves accuracy at one spot, she moves the target to the next corner. A catcher or a target on the wall can be used. To adjust for the in and out targets, the pitcher must adjust her body angle from her normal stance. She turns the toe on the rubber about a half inch in or out from the position she used to throw to the middle of the plate.
Drill 4: Wrist Snap Behind Back
Purpose: To develop the wrist snap by isolating the wrist, which prevents the pitcher from using the elbow to snap the ball.
Procedure: The pitcher stands sideways 5 to 10 feet from the catcher or a wall. The glove side faces the target, and the ball is behind the back. The pitcher flips the ball by snapping the wrist.
Drill 5: Oversized and Undersized Ball Spins
Purpose: To make the pitcher practice throwing a riseball.
Procedure: Using a baseball or an 11-inch ball may help the pitcher make the correct movements to get underneath the ball. The smaller the size of the ball allows the fingers to be more flexible and allows the correct movements to occur with less effort. A pitcher can use an undersized ball when initially trying to create muscle memory for the correct spin movements. An oversized ball is helpful in speeding up the wrist snap because the hand must pass under more area in the same amount of time. The oversized ball can also illustrate the spin to a pitcher who may be struggling with the backward concept. A 14-inch ball seems to be the perfect size because the pitcher can hold on to it comfortably throughout the circle before snapping the wrist at release. The routine used with these balls can mirror the routing used with the Spinner-starting close up without the circle and adding distance as well as the full circle.
Marc Dagenais is a softball peak performance coach that provides softball tips, softball drills, and information on techniques for hitting, pitching, coaching, and training through his blog at http://www.softballperformance.com/blog
He also helps softball players and coaches improves their game by sharing with them the tips and strategies used by the world's best softball players and coaches to achieve extraordinary performances. You can sign-up to get his FREE Softball Tips at http://www.softballperformance.com/softball-tips.html Go Sign-up Now!
Article Source: http://EzineArticles.com/?expert=Marc_Dagenais
Wednesday, September 16, 2009
Learning the Basics of Softball Pitching
By Marc Dagenais
Softball pitching is one of toughest job any player could face. It is a skill that requires you to be critical in thinking while keeping yourself in track inside the diamond. Remember, a good hitter won't able to beat a good pitcher. That is why learning the ropes of proper pitching the ball needs proper training.
Pitching in slow-pitch softball requires a different pitching style in a fast-pitch softball. It is a must that one should differentiate which type of softball you are going to join so that you would know which among the two below will best suit your needs.
A fast-pitch softball requires your athleticism, stamina, dedication and calculated thinking. Even if you fail among those characteristics, just follow the simple tips and it will bring you success. This is for the fast-pitch softball player:
If you are right-handed person, hold the ball by using all your fingers, except for the thumb, on a straight seam while your thumb will clutch on the straight seam of the ball at the opposite side. Make sure that you should leave spaces between your palm and the ball. Place your feet properly on the pitching mound and your hips should be square to the home plate. Put your weight on the left foot while you are positioning your hands to ready for the pitch. Extend your right arm past your hips and bring your left arm to your chest, while putting your weight in your right foot. Simultaneously with your feet movements, keep your arms straight. The left -gloved hand should be eyelevel and the ball hand should continue its circling up until it is extended towards the sky. With your "open" hips facing the home plate, release the ball while your gloved-hand reaches your side. Do not "close" your hips until the ball was released. End your pitch by bending your knees and your gloved-hand is ready to field just in case the ball is hit. Reverse the place of your hand if you are left-handed.
The slow-pitch softball is almost the same with the fast-pitch softball, except for some minor changes. Use a circle grip in holding the ball, by placing your hands around it. Begin your pitching motion by putting the right hand inside the glove or just in front of you. Position your feet in a way that you would be able to maintain your balance and provide enough power in pitching the ball. Step forward and move your ball hand like a swinging pendulum. Let go of the ball when it is in your waist level. Get into the fielding stance because the ball may be hit right back at you.
The key to being a good pitcher is by a constant practice. Practice makes perfect! Maintain your focus on the game and be relaxed. The ball might be spinning for your victory.
Marc Dagenais, MHK, CSCS, is a softball peak performance coach that helps players and teams hit with more power, run faster, throw harder, become mentally tougher, and be more dominant on the softball field. To get tons of great FREE softball pitching tips to boost your game, visit us at: http://www.softballperformance.com
Article Source: http://EzineArticles.com/?expert=Marc_Dagenais
www.SoftballrUs.com
FastpitchSoftballSupply.com
BattingCagesDirect.com
BattingCagesrUs.com
AdvancedSkillsTee.com
ZipnHit-Pro.com
Sunday, September 6, 2009
Train Your Pitchers With These Softball Pitching Drills
By Marc Dagenais
When you look at a softball game closely, you'll realize how important the role of the pitcher is in your game. Although your good batters score for your team, your pitcher needs to balance that by preventing the other team from scoring.
That's why it's also important that you constantly drive your pitchers to do better. The more accurate and varied their pitches are, the more difficult it will be for opposing batters to hit the ball. So here are some softball pitching drills that will help improve your pitcher's skills.
Football Toss
This drill's purpose is to teach or develop your pitcher's correct ball-rise release.
To do the football toss, you let your pitcher throw a mid-sized ball to a partner. In throwing the ball, the pitcher should place her fingers along the seams and the thumb on the opposite side. The ball should spin when thrown at the catcher. If it wobbles, it means that the pitcher threw it with the palm facing her partner.
Wrist Snapping Drill
An excellent drill for developing wrist snap, it does its job by isolating the wrist throughout the exercise.
This is done by partners facing each other and around 10 ft. apart. If right handed, the pitcher should bend the right knee and kneel on the left knee. The pitching arm is fixed on the leg while holding the ball under the knee. She then flips the ball into the air to her partner who catches it and does the same.
Fielding Bunts
One of the most critical situations for pitchers is when a batter bunts a ball. That's because the bunted ball is most likely to fall in the pitcher's proximity.
To train for these situations, position your pitcher on the mound and a player on the 1st or 2nd base or both. Then toss the ball towards the mound to simulate a bunt. The pitcher should then throw the ball to the first base. Let the pitcher return to the mound and repeat the drill.
In doing this drill, also remind your pitcher to set her feet towards the base where she's most likely to throw the ball.
Throwing to Bases
Since she is situated in the middle of the field, the pitcher should also practice throwing the ball to bases.
In this drill, the pitcher should be accompanied by players on every base and a hitter. The hitter fungos the ball to the pitcher who then practices throwing the ball at every base. This should be done at least 10 times for each base including the home plate.
There you have it, different drills to help train your pitchers. That should be enough to keep you and your pitchers busy for the next few weeks. Make sure you repeat these drills over and over until your pitchers perfect them.
For more softball pitching drills and other softball tips, check out my website at URL. See you there!
Marc Dagenais is a Softball Peak Performance Coach that helps softball players turn their athletic talent into extraordinary performances and help coaches get more out of their players, turn their struggling team around or get an edge over their opponents. Visit us to sign-up to get our FREE softball pitching tips!
Article Source: http://EzineArticles.com/?expert=Marc_Dagenais
When you look at a softball game closely, you'll realize how important the role of the pitcher is in your game. Although your good batters score for your team, your pitcher needs to balance that by preventing the other team from scoring.
That's why it's also important that you constantly drive your pitchers to do better. The more accurate and varied their pitches are, the more difficult it will be for opposing batters to hit the ball. So here are some softball pitching drills that will help improve your pitcher's skills.
Football Toss
This drill's purpose is to teach or develop your pitcher's correct ball-rise release.
To do the football toss, you let your pitcher throw a mid-sized ball to a partner. In throwing the ball, the pitcher should place her fingers along the seams and the thumb on the opposite side. The ball should spin when thrown at the catcher. If it wobbles, it means that the pitcher threw it with the palm facing her partner.
Wrist Snapping Drill
An excellent drill for developing wrist snap, it does its job by isolating the wrist throughout the exercise.
This is done by partners facing each other and around 10 ft. apart. If right handed, the pitcher should bend the right knee and kneel on the left knee. The pitching arm is fixed on the leg while holding the ball under the knee. She then flips the ball into the air to her partner who catches it and does the same.
Fielding Bunts
One of the most critical situations for pitchers is when a batter bunts a ball. That's because the bunted ball is most likely to fall in the pitcher's proximity.
To train for these situations, position your pitcher on the mound and a player on the 1st or 2nd base or both. Then toss the ball towards the mound to simulate a bunt. The pitcher should then throw the ball to the first base. Let the pitcher return to the mound and repeat the drill.
In doing this drill, also remind your pitcher to set her feet towards the base where she's most likely to throw the ball.
Throwing to Bases
Since she is situated in the middle of the field, the pitcher should also practice throwing the ball to bases.
In this drill, the pitcher should be accompanied by players on every base and a hitter. The hitter fungos the ball to the pitcher who then practices throwing the ball at every base. This should be done at least 10 times for each base including the home plate.
There you have it, different drills to help train your pitchers. That should be enough to keep you and your pitchers busy for the next few weeks. Make sure you repeat these drills over and over until your pitchers perfect them.
For more softball pitching drills and other softball tips, check out my website at URL. See you there!
Marc Dagenais is a Softball Peak Performance Coach that helps softball players turn their athletic talent into extraordinary performances and help coaches get more out of their players, turn their struggling team around or get an edge over their opponents. Visit us to sign-up to get our FREE softball pitching tips!
Article Source: http://EzineArticles.com/?expert=Marc_Dagenais
Subscribe to:
Posts (Atom)
